| Linkedin - SOLIDWORKS Designing A Stirling Engine/1. Introduction/1. Build a Stirling engine in SOLIDWORKS.mp4 |
4.3 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/1. Introduction/2. What you should know.mp4 |
2.2 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/1. Introduction/3. Working with the files in this course.mp4 |
6.8 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/10. Making the Engine and Conclusion/1. Creating the parts in real life.mp4 |
44.7 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/2. Introducing Stirling Engines/1. Introducing Stirling engines.mp4 |
25 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/3. Create the Flywheel Parts/1. Create the flywheel.mp4 |
25 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/3. Create the Flywheel Parts/2. Finish the flywheel.mp4 |
27 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/3. Create the Flywheel Parts/3. Create the flywheel bracket.mp4 |
27.7 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/3. Create the Flywheel Parts/4. Create the crank.mp4 |
15.9 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/3. Create the Flywheel Parts/5. Create the base.mp4 |
6.3 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/4. Starting the Assembly with the Current Parts/1. Create a new assembly.mp4 |
21.9 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/4. Starting the Assembly with the Current Parts/2. Fix the remaining parts in place.mp4 |
39.9 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/4. Starting the Assembly with the Current Parts/3. Add screws using the SOLIDWORKS toolbox.mp4 |
33 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/4. Starting the Assembly with the Current Parts/4. Adding screws without the SOLIDWORKS toolbox.mp4 |
26.5 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/5. Create the Heater Parts/1. Create the heater bracket block.mp4 |
15.2 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/5. Create the Heater Parts/2. Create the heater bracket cover.mp4 |
12.5 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/5. Create the Heater Parts/3. Create the heater cylinder.mp4 |
15.7 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/5. Create the Heater Parts/4. Create the inner piston.mp4 |
10.1 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/5. Create the Heater Parts/5. Create the piston cap.mp4 |
8.9 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/5. Create the Heater Parts/6. Create the piston rod.mp4 |
11.2 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/5. Create the Heater Parts/7. Create the rod connector.mp4 |
15.6 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/5. Create the Heater Parts/8. Create the linkage.mp4 |
7.2 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/6. Add Heater Parts to the Assembly/1. Add new parts to the assembly.mp4 |
41 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/6. Add Heater Parts to the Assembly/2. Finish off this section of the assembly with screws.mp4 |
31.9 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/7. Creating the Cooler Parts/1. Create the cooler bracket.mp4 |
13.9 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/7. Creating the Cooler Parts/2. Create the cooler cylinder.mp4 |
27.9 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/7. Creating the Cooler Parts/3. Create the cooler piston.mp4 |
4.1 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/8. Add Cooler Parts to the Assembly/1. Add the cooler parts.mp4 |
42.9 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/8. Add Cooler Parts to the Assembly/2. Link up all parts with mates.mp4 |
32.6 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/8. Add Cooler Parts to the Assembly/3. Model and add the air valves.mp4 |
29.7 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/8. Add Cooler Parts to the Assembly/4. Model the air tube.mp4 |
81.8 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/9. Finish the Assembly/1. Create and add burner plate.mp4 |
32.1 MB |
| Linkedin - SOLIDWORKS Designing A Stirling Engine/Ex_Files_SOLIDWORKS_Designing_a_Stirling_Engine.zip |
12.6 MB |
Magnet link
