| Linkedin - SOLIDWORKS Designing for Consumer Electronics/Ex_Files_SOLIDWORKS_Consumer_Electronics.zip |
38.5 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/001 Introduction to designing for consumer electronics.srt |
2 KB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/002 What you should know and working with the files in this course.mp4 |
7.8 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/002 What you should know and working with the files in this course.srt |
5 KB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/003 Designing for consumer electronics.mp4 |
6.9 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/003 Designing for consumer electronics.srt |
4 KB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/004 Create the initial controller shape.mp4 |
15.2 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/004 Create the initial controller shape.srt |
11 KB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/005 Sketch loft profiles for a handgrip.mp4 |
23.4 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/005 Sketch loft profiles for a handgrip.srt |
16 KB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/006 Use lofts to make a flowing grip.mp4 |
18.3 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/006 Use lofts to make a flowing grip.srt |
12 KB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/007 Smooth the controller grip using fillets.mp4 |
9.6 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/007 Smooth the controller grip using fillets.srt |
5 KB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/008 Add the second half using mirroring.mp4 |
11.3 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/008 Add the second half using mirroring.srt |
8 KB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/009 Add button and joystick pads.mp4 |
20.6 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/009 Add button and joystick pads.srt |
11 KB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/010 Hollow out the model using the shell feature.mp4 |
9.5 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/010 Hollow out the model using the shell feature.srt |
6 KB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/011 Split the controller into two halves.mp4 |
17.2 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/011 Split the controller into two halves.srt |
10 KB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/012 Create an assembly.mp4 |
27.1 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/013 Add fastening details.mp4 |
18.4 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/013 Add fastening details.srt |
9 KB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/014 Finish the standoffs.mp4 |
24.1 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/014 Finish the standoffs.srt |
12 KB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/015 Add ribs to the rear half.mp4 |
37.5 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/015 Add ribs to the rear half.srt |
18 KB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/016 Add ribs to the front half.mp4 |
27.7 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/016 Add ribs to the front half.srt |
11 KB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/017 Create the PCB model.mp4 |
23.7 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/017 Create the PCB model.srt |
14 KB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/018 Add the PCB to the assembly.mp4 |
31.9 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/018 Add the PCB to the assembly.srt |
12 KB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/019 Cut away a space to fit the PCB within the assembly.mp4 |
18 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/019 Cut away a space to fit the PCB within the assembly.srt |
5 KB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/020 Model the buttons.mp4 |
10.7 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/020 Model the buttons.srt |
5 KB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/021 Add the buttons to the assembly.mp4 |
19.2 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/021 Add the buttons to the assembly.srt |
9 KB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/022 Create the D-Pad buttons.mp4 |
19.1 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/022 Create the D-Pad buttons.srt |
11 KB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/023 Add the D-Pad buttons to the assembly.mp4 |
12.7 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/023 Add the D-Pad buttons to the assembly.srt |
5 KB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/024 Model and add the center buttons.mp4 |
27 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/024 Model and add the center buttons.srt |
11 KB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/025 Model the joystick.mp4 |
12.8 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/025 Model the joystick.srt |
7 KB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/026 Insert the joystick and adjust main case.mp4 |
37.2 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/026 Insert the joystick and adjust main case.srt |
11 KB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/027 Next steps.mp4 |
9 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/027 Next steps.srt |
5 KB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/001 Introduction to designing for consumer electronics.mp4 |
5.7 MB |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/GFXDomain.NET.txt |
448 B |
| Linkedin - SOLIDWORKS Designing for Consumer Electronics/iNFO.url |
121 B |
Magnet link
