| SolidWorks 2014 Essential Training/0.introduction/Watch the Online Video Course SolidWorks 2014 Essential Training.mp4 |
9.8 MB |
| SolidWorks 2014 Essential Training/0.introduction/Watch the Online Video Course SolidWorks 2014 Essential Training_2.mp4 |
1.8 MB |
| SolidWorks 2014 Essential Training/1.Touring the interface/1.1-Launcha the solidworks for the first time.mp4 |
9.2 MB |
| SolidWorks 2014 Essential Training/1.Touring the interface/1.2-Accessing and customizing the ribbon bar.mp4 |
15 MB |
| SolidWorks 2014 Essential Training/1.Touring the interface/1.3-Touring the shortcut bar and identifying essential keys.mp4 |
21.6 MB |
| SolidWorks 2014 Essential Training/1.Touring the interface/1.4-Saving-renaming and managing files.mp4 |
23.3 MB |
| SolidWorks 2014 Essential Training/1.Touring the interface/1.5-Working with the new view cube or view selector.mp4 |
8.2 MB |
| SolidWorks 2014 Essential Training/1.Touring the interface/1.6-New features.mp4 |
6.6 MB |
| SolidWorks 2014 Essential Training/10.Blocks/10.1-Working with resuable sketches and blocks.mp4 |
7.7 MB |
| SolidWorks 2014 Essential Training/10.Blocks/10.2-Creating blocks.mp4 |
12.5 MB |
| SolidWorks 2014 Essential Training/10.Blocks/10.3-Designing with blocks.mp4 |
9.2 MB |
| SolidWorks 2014 Essential Training/11.Assembly- Putting it All Together/11.1-Understanding the tools for beginning a new assembly.mp4 |
16.1 MB |
| SolidWorks 2014 Essential Training/11.Assembly- Putting it All Together/11.2-The basic steps in creating an assembly.mp4 |
11.9 MB |
| SolidWorks 2014 Essential Training/11.Assembly- Putting it All Together/11.3-Mating parts together in an assembly.mp4 |
21.7 MB |
| SolidWorks 2014 Essential Training/11.Assembly- Putting it All Together/11.4-Working with subassemblies.mp4 |
6.9 MB |
| SolidWorks 2014 Essential Training/11.Assembly- Putting it All Together/11.5-Linear and circular assembly patterns.mp4 |
18.2 MB |
| SolidWorks 2014 Essential Training/11.Assembly- Putting it All Together/11.6-Downloading premade parts from the Internet.mp4 |
13.4 MB |
| SolidWorks 2014 Essential Training/11.Assembly- Putting it All Together/11.7-Using Toolbox.mp4 |
12.3 MB |
| SolidWorks 2014 Essential Training/12.Advance Mates/12.1-Mating parts with coincident-parallel and distance mates.mp4 |
15.4 MB |
| SolidWorks 2014 Essential Training/12.Advance Mates/12.2-Mating parts with width mates.mp4 |
22.1 MB |
| SolidWorks 2014 Essential Training/12.Advance Mates/12.3-Mating parts with parth mates.mp4 |
6.5 MB |
| SolidWorks 2014 Essential Training/12.Advance Mates/12.4-Mating parts by aligning planes.mp4 |
7.4 MB |
| SolidWorks 2014 Essential Training/13.Hole wizard/13.1-Getting started with the Hole wizard.mp4 |
14.2 MB |
| SolidWorks 2014 Essential Training/13.Hole wizard/13.2-Positioning holes in layout sketches.mp4 |
20.2 MB |
| SolidWorks 2014 Essential Training/14.In-Context Modeling/14.1-Linking sketches to other parts.mp4 |
13.7 MB |
| SolidWorks 2014 Essential Training/14.In-Context Modeling/14.3-Linking to layout sketches.mp4 |
23.6 MB |
| SolidWorks 2014 Essential Training/14.In-Context Modeling/14.3-Using the Hole Wizard in context.mp4 |
15.6 MB |
| SolidWorks 2014 Essential Training/15.Creating Threads on Parts/15.1-Understanding threading concepts.mp4 |
24.6 MB |
| SolidWorks 2014 Essential Training/15.Creating Threads on Parts/15.2-Using a helix and swept Path to create a thread.mp4 |
15.7 MB |
| SolidWorks 2014 Essential Training/15.Creating Threads on Parts/15.3-Understanding internal threads.mp4 |
22.3 MB |
| SolidWorks 2014 Essential Training/16.Equations Design Tables/16.1-Using equations to drive a sketch.mp4 |
14.5 MB |
| SolidWorks 2014 Essential Training/16.Equations Design Tables/16.2-Working with complex calculations.mp4 |
5.7 MB |
| SolidWorks 2014 Essential Training/16.Equations Design Tables/16.3-Integrating Microsoft Excel to manage design.mp4 |
20.6 MB |
| SolidWorks 2014 Essential Training/16.Equations Design Tables/16.4-Building assemblies using part configurations.mp4 |
10.2 MB |
| SolidWorks 2014 Essential Training/17.Part Drawings/17.1-Working with drawing templates.mp4 |
21.5 MB |
| SolidWorks 2014 Essential Training/17.Part Drawings/17.2-Setting up drawing options and sheet properties.mp4 |
10.8 MB |
| SolidWorks 2014 Essential Training/17.Part Drawings/17.3-Choosing the correct projection angle.mp4 |
6.9 MB |
| SolidWorks 2014 Essential Training/17.Part Drawings/17.4-Adding model view to a drawing.mp4 |
30.7 MB |
| SolidWorks 2014 Essential Training/18.Dimensioning/18.1-Creating general dimension notations.mp4 |
19 MB |
| SolidWorks 2014 Essential Training/18.Dimensioning/18.2-Creating ordinate and running dimensions.mp4 |
9.3 MB |
| SolidWorks 2014 Essential Training/18.Dimensioning/18.3-Dimensioning holes and curved features.mp4 |
9.3 MB |
| SolidWorks 2014 Essential Training/18.Dimensioning/18.4-Using the autodimension tools.mp4 |
11.5 MB |
| SolidWorks 2014 Essential Training/19.Adding General Annotations/19.1-Creating holes and callouts.mp4 |
17.1 MB |
| SolidWorks 2014 Essential Training/19.Adding General Annotations/19.2-Adding center marks and centerlines to a drawing.mp4 |
13.9 MB |
| SolidWorks 2014 Essential Training/19.Adding General Annotations/19.3-Adding item notes.mp4 |
10.2 MB |
| SolidWorks 2014 Essential Training/19.Adding General Annotations/19.4-Making drwaing revisions.mp4 |
8.8 MB |
| SolidWorks 2014 Essential Training/2.Getting Started with 3D/2.1-Understanding the 3d World.mp4 |
8 MB |
| SolidWorks 2014 Essential Training/2.Getting Started with 3D/2.2-Creating your first part.mp4 |
9.1 MB |
| SolidWorks 2014 Essential Training/2.Getting Started with 3D/2.3-The virual parametric prototyping environment.mp4 |
6.6 MB |
| SolidWorks 2014 Essential Training/2.Getting Started with 3D/2.4-The Feature Manger and Feature based modeling.mp4 |
10.1 MB |
| SolidWorks 2014 Essential Training/2.Getting Started with 3D/2.5-History based modeling and the rooback bar.mp4 |
10.1 MB |
| SolidWorks 2014 Essential Training/20.Asswembly Drawings/20.1-Adding assemblies to drawings.mp4 |
7.4 MB |
| SolidWorks 2014 Essential Training/20.Asswembly Drawings/20.2-Including a bill of materials.mp4 |
6.6 MB |
| SolidWorks 2014 Essential Training/20.Asswembly Drawings/20.3-Adding ballons to specify parts on an assembly drawing.mp4 |
6.4 MB |
| SolidWorks 2014 Essential Training/20.Asswembly Drawings/20.4-Adding a title Block and sheet properties.mp4 |
7.4 MB |
| SolidWorks 2014 Essential Training/20.Asswembly Drawings/20.5 Building and Exploded View for an assembly Drawing.mp4 |
15.5 MB |
| SolidWorks 2014 Essential Training/21.Excercise Files/Conclusion.mp4 |
3.4 MB |
| SolidWorks 2014 Essential Training/21.Excercise Files/Ex_Files_Solidworks2014.zip |
31.6 MB |
| SolidWorks 2014 Essential Training/3.Basic Solid Modeling/3.1-Starting a new sketch.mp4 |
17.9 MB |
| SolidWorks 2014 Essential Training/3.Basic Solid Modeling/3.2-The six steps used in almost all modeling features.mp4 |
1.4 MB |
| SolidWorks 2014 Essential Training/3.Basic Solid Modeling/3.3-The line and centerline tools.mp4 |
9.4 MB |
| SolidWorks 2014 Essential Training/3.Basic Solid Modeling/3.4-Using the circular tool.mp4 |
5.4 MB |
| SolidWorks 2014 Essential Training/3.Basic Solid Modeling/3.5-Adding and removing relationships and dimensions.mp4 |
22.4 MB |
| SolidWorks 2014 Essential Training/3.Basic Solid Modeling/3.6-System options units and templates.mp4 |
14.2 MB |
| SolidWorks 2014 Essential Training/3.Basic Solid Modeling/3.6-Understanding relationship types.mp4 |
12.8 MB |
| SolidWorks 2014 Essential Training/4.More Drawing Tools/4.1-Drawing rectangles.mp4 |
17.3 MB |
| SolidWorks 2014 Essential Training/4.More Drawing Tools/4.2-Creating arcs in a sketch.mp4 |
13.5 MB |
| SolidWorks 2014 Essential Training/4.More Drawing Tools/4.3-Drawing splines in a sketch.mp4 |
16 MB |
| SolidWorks 2014 Essential Training/4.More Drawing Tools/4.4-Sketching polygons.mp4 |
12.8 MB |
| SolidWorks 2014 Essential Training/5.Sketch Editing Tools/5.1-Trimming and extending portions of a sketch.mp4 |
11.2 MB |
| SolidWorks 2014 Essential Training/5.Sketch Editing Tools/5.10-Adding text to parts.mp4 |
11.5 MB |
| SolidWorks 2014 Essential Training/5.Sketch Editing Tools/5.11-Using the convert Convert Entities Command.mp4 |
8 MB |
| SolidWorks 2014 Essential Training/5.Sketch Editing Tools/5.2-Creating offset geometry.mp4 |
9.7 MB |
| SolidWorks 2014 Essential Training/5.Sketch Editing Tools/5.3-Moving copying rotating and scaling elements.mp4 |
8.5 MB |
| SolidWorks 2014 Essential Training/5.Sketch Editing Tools/5.4-Erasing undoing and redoing actions.mp4 |
6.8 MB |
| SolidWorks 2014 Essential Training/5.Sketch Editing Tools/5.5-Using the mirror tools.mp4 |
6.4 MB |
| SolidWorks 2014 Essential Training/5.Sketch Editing Tools/5.6-Creating repeating patterns in a sketch.mp4 |
15.2 MB |
| SolidWorks 2014 Essential Training/5.Sketch Editing Tools/5.7-Using construction lines to build robust sketches.mp4 |
11.9 MB |
| SolidWorks 2014 Essential Training/5.Sketch Editing Tools/5.8-Applying fillets and chamfers to a sketch.mp4 |
6.8 MB |
| SolidWorks 2014 Essential Training/5.Sketch Editing Tools/5.9-Working with slots.mp4 |
12.6 MB |
| SolidWorks 2014 Essential Training/6.Reference Geometry/6.1-Working with Planes.mp4 |
18.8 MB |
| SolidWorks 2014 Essential Training/6.Reference Geometry/6.2-Placing and using axes.mp4 |
7.6 MB |
| SolidWorks 2014 Essential Training/6.Reference Geometry/6.3-Placing an coordinates system.mp4 |
5.5 MB |
| SolidWorks 2014 Essential Training/7.Building 3d Geometry/7.1-Extruding a sketch into a 3D object.mp4 |
14.2 MB |
| SolidWorks 2014 Essential Training/7.Building 3d Geometry/7.2-Using Revolve to create 3D parts.mp4 |
7.9 MB |
| SolidWorks 2014 Essential Training/7.Building 3d Geometry/7.3-Using Loft to create complex shapes.mp4 |
14.6 MB |
| SolidWorks 2014 Essential Training/7.Building 3d Geometry/7.4-Refining a loft shape with guide curves.mp4 |
9.1 MB |
| SolidWorks 2014 Essential Training/7.Building 3d Geometry/7.5-Using the sweep to create wire and pipe shapes.mp4 |
10.1 MB |
| SolidWorks 2014 Essential Training/8.Removing Material/8.1-Modifying parts using the Extruded cut tool.mp4 |
21.7 MB |
| SolidWorks 2014 Essential Training/8.Removing Material/8.2-Working with the Revolved Cut tool.mp4 |
19.3 MB |
| SolidWorks 2014 Essential Training/8.Removing Material/8.3-Using the lofted Cut tool.mp4 |
12 MB |
| SolidWorks 2014 Essential Training/8.Removing Material/8.4-Cutting holes and grooves with the Swept Cut tool.mp4 |
18.5 MB |
| SolidWorks 2014 Essential Training/9.Refining Geometry/9.1-Using fillets and chamnfers to smooth corners.mp4 |
20.9 MB |
| SolidWorks 2014 Essential Training/9.Refining Geometry/9.2-Creating repeating rectangular patterns.mp4 |
11.4 MB |
| SolidWorks 2014 Essential Training/9.Refining Geometry/9.3-Creating a circular pattern.mp4 |
7.9 MB |
| SolidWorks 2014 Essential Training/9.Refining Geometry/9.4-Mirroring objects.mp4 |
11.7 MB |
| SolidWorks 2014 Essential Training/9.Refining Geometry/9.5-Using the shell and draft tools.mp4 |
14.3 MB |
| SolidWorks 2014 Essential Training/9.Refining Geometry/9.6-Scaling parts.mp4 |
4.4 MB |
Magnet link
